澳洲8全天在线计划

澳洲8精准计划网站

Available in variety of thicknesses and foam densities. These tapes were designed for mounting and joining applications such as nameplates, plastic trim, signs and emblems. Also used for long term bonding in mirror mounting and permanent fixing for both plastic and metal materials. The acrylic adhesive versions are suitable for exterior applications.

Rubber Adhesive, 1/16" PE Foam Carrier: LX-113 (White), LX-248 (Black)

4# density foam.

Peel adhesion: > 100 oz./inch.

These products are cross-linked 1/16" polyethylene foam tapes double-coated with a high tack permanent rubber-based adhesive system and protected by a polycoated densified kaft release liner. They were designed for mounting and joining of nameplates, plastic trim, signs, and emblems. Also used for long term bonding for mirror mounting and permanent fixing for both plastic and metal materials. Suitable for most indoor applications.

Note: Be sure all surface areas are free from contamination before applying LX-113 or LX-248.

These are approximate values and do not constitute a warranty. It is the customer's responsibility to determine these products fitness for use in the intended end use application. Test data contained herein is believed to be reliable and is not stated as, or to be taken as, a specification of these products.

Specifications

Color: Black
Foam Density: 4 lbs/cubic foot
Foam Softening Temperature: 100 ºC
Adhesive: Rubber-based
Product Thickness: 1/16 in
Peel Adhesion PSTC-3: >100 oz/in
Shear Strength PSTC-9: >100 Hours At 77 ºF With 2.2 Lb Load
Polyken Tack: 800 g
Shear Resistance: 1 Square Inch: 300+ Hours 3/4 Square Inch: 1 Hour
Service Temperature: 0 - 150 ºF


  • Model: LX-248


Your IP Address is: 20.112.83.4

Parse Time: 0.111 - Number of Queries: 125 - Query Time: 0.04319523928833快乐飞艇公式 澳洲幸运10规则 极速赛车2期计划 澳洲10开奖号码 SG飞艇开奖最快结果 澳洲10人工计划网